Vertical Exposed Fan Coil Unit

Description

Model Demonstration
Parameter

Model Demonstration

The vertical surface fan coil is mounted on the wall side of the room. The air volume is from 340 to 2380 m3/h. The cooling capacity is from 1.8 to 12.6 kW. No high static pressure type and four tube type fan coil unit. It can be used directly for large temperature difference conditions. Also can provide dry fan coil unit.

Feature or Static Pressure: C4-four tube type, T7-large temperature difference, G30: 30Pa/G50: 50 Pa.

Installation type: A-concealed, M-surface.

Structure: W-Horizontal, L-Vertical, TK-ceilling

Nominal air volume: Number × 10m3 / h

FP- standard fan coil: FPG stands for dry fan coil

Parameter

National Standard Technical Specifications of FP Series Fan Coil Unit

Index	Project		FP-34	FP-51	FP-68	FP-85	FP-102	FP-136	FP-170	FP-204	FP-238
Rated air flow	H	m³/h	340	510	680	850	1020	1360	1700	2040	2380
	M	m³/h	250	380	510	630	760	1020	1270	1530	1780
	L	m³/h	170	250	340	420	510	680	850	1020	1190
Rated cooling capacity	H	W	1800	2700	3600	4500	5400	7200	9000	10800	12600
	M	W	1590	2300	3160	3900	4600	6330	7750	9200	10800
	L	W	1260	1800	2520	3100	3700	5040	6200	7300	8700
Heat	H	W	2700	4050	5400	6750	8100	10800	13500	16200	18900
Input power	LSP	W	37	52	62	76	96	134	152	189	228
Input power	30Pa	W	44	59	72	87	108	156	174	212	253
Unit noise	LSP	dB(A)	37	39	41	43	45	46	48	50	52
Unit noise	30Pa	dB(A)	40	42	44	46	47	48	50	52	54
Coil	Model		Φ9.52 Copper Tube through Aluminum fins / 3 rows of 8 holes / Standard sheet distance
	WF	kg/h	310	465	620	775	930	1240	1550	1850	2160
	WR	kPa	30	33	33	33	44	44	44	44	55
Fan	Model		Φ160 double inlet centrifugal fan
Fan	QTY	SET	1	1	2	2	2	3	4	4	4
Motor	Model		Single-phase capacitor running three-speed motor
Motor	QTY	SET	1	1	1	1	1	2	2	2	2
Interface	Water pipe Interface		Water in/ out pipe: 3/4＂ inside thread /Condensing water pipe: 3/4＂ outside thread
Interface	Electrical Interface		Terminals ( five core wire high / medium / low / zero / ground )
WGT/kg	Standard		12	13	17	18	19	26	29	33	36
	With return air box		14	15	20	21	23	31	34	38	42
	LA		20	21	25	27	29	38	46	50	52
	LM		21	22	23	26	27	31	34	40	43
	WM		21	22	23	26	27	31	34	40	43
	TK		21	22	22	26	27	28	33	33	34
Remark: LSP(low static pressure); WF(Water flow); WR(water resistance) ◆ Technical Description: 1. Date under cooling condition: Air inlet DB/WB: 27/19.5℃; water inlet temperature 7℃; the temperature difference 5 ℃. 2. The cooling capacity of the unit: surface air cooler: 2.12mm standard slice distance; Adjust the slice distance to change the heat transfer area, the cooling capacity can be changed. 3. Date under heating condition: Air inlet DB/WB: DB21℃; water inlet temperature 60℃. The same water condition as refrigeration. 4. Unit noise: One meter measurement in front of and below the unit. The high static pressure unit needs to be installed with a return air duct. It is controlled at the air outlet after controlling the static pressure. 5. The above date complies with 12Pa low static pressure of external unit and 30Pa high static pressure . If the users need 50Pa high static, pls specify.