- high-quality high-resilient sponge
- thermal insulation and anti-freezing;
- Aluminum foil surface
- Self-adhesive design
- Insulation cotton has good waterproof performance
- Scratch Resistant,Stable and Strong Performance
- Extended Use Time
- Wide Application
NBR Rubber Sheet With Self-adhesive And Smooth Aluminum Foil
Description
- Insulation board material: high-density rubber-plastic insulation cotton, closed-cell foam structure, high-quality high-resilient sponge, thermal insulation and anti-freezing;
- Aluminum foil surface: flame retardant aluminum foil material, waterproof surface, embossed aluminum waterproof layer, friction resistance, fire resistance
- Self-adhesive design: self-adhesive design, self-adhesive design, easy installation, long-lasting without degumming;
- Insulation cotton has good waterproof performance, waterproof and moisture proof, no mold, corrosion resistance, surface flame retardant material, fireproof, flame retardant, and higher safety factor.
- Applicable scene: high-efficiency heat insulation, flame retardant insulation, widely used in the roof insulation of sun rooms, iron rooms, etc., automotive, wall, ceiling and other effects.
- Scratch Resistant: The surface high-fiber cloth is fiberglass. Transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel.
- Extended Use Time: Slow down the life pipeline and circuit. In the summer, due to the hot weather, heat comes from the front cover of car, shortening the life of pipeline and circuit, accelerate cracking.
- Insulation cotton has good waterproof performance, waterproof and moisture proof, no mold, corrosion resistance, surface flame retardant material, fireproof, flame retardant, and higher safety factor;
- Stable and Strong Performance: Strong sound insulation and absorption performance ,heat insulation, damping and antisepsis.
- Thickness: 6mm,10mm,13mm,16mm,20mm, 25mm,35mm,40mm
Physical properties | Specifications | Standard | ||||
Cell structure | Closed-cell | — | ||||
Density(kg/m³) | ≤80 | ASTM D 1667 | ||||
Flammability | Oxygen index | ≥35% | GB/T 8624-2012 | |||
Smoke Density | ≤70 | GB/T 8627-2007 | ||||
— | Class 1 | BS 476: Part 7 | ||||
Combustion toxicity of smoke(t1) | ZA3 |
|
||||
Thermal conductivity BTU.in/ft².hr.℉(W/m.k) | Mean temp. | –4℉(-20℃) | 32℉(0℃) | 104℉(40℃) | ASTM C177&C518 | |
K-value W/(m.k) | ≤0.031 | ≤0.033 | ≤0.037 | |||
Water vapor permeability (g/m.s.Pa) | ≤1.92×10-11 | ASTM E96 | ||||
Moisture resistance (μ value) | ≥12000 | DIN52615 | ||||
Water Absorption in vacuum (weight%) | ≤9% | ASTM D1056 | ||||
Dimension stability 105 ± 3℃, 7d | ≤9% | GB/T 8811-2008 | ||||
Crank resistance(N/cm) | ≥2.6 | GB/T 10808 | ||||
Compression resilience ration 50%,72h | ≥71% | GB/T 6669-2008 | ||||
Anti-ozone ozone pressure 202mpa,200h | No cracking | ASTM D1171 | ||||
Aging Resistance | Slightly rucking, no cracks, no pinhole, no distortion. |
GB/T 16259 | ||||
Service temperature range | -50~105℃ (-58~221℉) | GB/T 17794-2008 |
Specification:
Thickness | Inch | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1-1/4 | 1-5/8 | 2 | 2-3/8 | 2-3/4 |
MM | 6 | 10 | 13 | 16 | 20 | 25 | 32 | 40 | 50 | 60 | 70 | |
Length | M | 30 | 20 | 15 | 13 | 10 | 8 | 6 | 2.3 | 2.3 | 2.3 | 2.3 |
Width | M | 1 1.2 1.4 1.5 |